Allied Telesis AT-S65 - Manual (Page 69)

AT-S65 Management Software User’s Guide
69
R_SYN
The status of the synchronization of the RX path, which can be one of
the following:
Off - The data is not synchronized (locked) on a receive path.
On - The data is synchronized (locked) on a receive path.
Port Side
The status of the port (tributary) side of the line card, that coordinates
with the Trib group of LEDs. The columns of information in this section
are:
Max Rate
The maximum rate for the SFP installed in the line card. This
information is only available when an SFP is installed.
Tx
The status of the transmit port, which can be one of the following:
Offline - The SFP transmitter is disabled.
Online - The SFP transmitter is enabled.
Rx
The status of the receive port, which can be one of the following:
Offline - The SFP input power is less than the threshold value for Rx
loss specified by the vendor.
Online - The SFP input power is higher than or equal to the threshold
value for Rx loss specified by the vendor.
SFP
The status of the SFP in the line card, which can be one of the
following:
In - An SFP is inserted in the SFP slot.
Out - No SFP is inserted in the SFP slot.
Note
The offline and online status of the RX and TX ports depends upon
the missing link status that has been set up. For more information,
refer to Chapter 7, “Setting Up the MissingLink Feature” on page 91.