Allied Telesis AT-S65 - Manual (Page 32)

Chapter 2: Basic Parameters
32
RPS Insertion/Removal An RPS has been inserted into or
removed from its slot.
Port Active/Shutdown The port is active or has been shut down.
Fan Failure A failure has occurred in one of the fan
modules.
Link Test Not yet available.
Missing Link The MissingLink setting has changed. To
set up the MissingLink feature, refer to
Chapter 7, “Setting Up the MissingLink
Feature” on page 91.
Cold Start The chassis has been power cycled.
Authentication An SNMP management application has
attempted to perform a Set function, and
the Set community string on an SNMP
management application is different from
the same community string on the
chassis.
Table 2. SNMP Traps (Continued)
Trap Description