Allied Telesis AT-S65 - Manual (Page 38)

Chapter 2: Basic Parameters
38
Note
The first two options on this menu are described in Chapter 6,
”Downloading AT-S65 Management Software Updates” on page 83.
The Reset and Restart the System option is described in “Resetting
and Restarting the System” on page 39. The remaining options are
described in Chapter 4, ”Monitoring System Performance” on page
51.
2. From the Administration Menu, select Ping a Remote System and
press Enter.
The Ping menu is shown in Figure 14.
Figure 14. Ping Menu
3. Enter the IP address of the device you want the chassis to ping and
press Enter.
The display, as shown in Figure 15, reports the results of the Ping
command.
Figure 15. Ping Results Example
A Ping command continues until you stop it by pressing any key.
4. Return to the Main Menu.
Please enter station IP address to ping:
Note: Ping will repeat until a key is pressed.
->
Ping a Remote System
Ping Request: 3, Ping Reply: 3, Ping Lost: 0