Allied Telesis AT-S65 - Manual (Page 19)

AT-S65 Management Software User’s Guide
19
Using the Menus Interface
Refer to Table 1 for information about how to move through the menus
and make menu selections.
Activated options are preceded by a > symbol. In the following example,
the Start Log option is activated.
Activity Monitor
>
Start Log
Stop Log
When you press Enter to select a field in which you can enter a value, the
-> symbol is displayed. For example:
Contact: ->
The -> symbol indicates that you can enter a new value for the option or
change the existing value. After you enter a value, press Enter again. To
delete an existing value without entering a new value, press the space bar
and then press Enter.
All changes are immediately activated on the chassis.
Table 1. Using the AT-S65 Menus Interface
When directed to You must
Select an option Highlight the option by pressing
the up (
↑
)
or down ( ↓ ) arrow key;
then press Enter.
or
Type the first character of the
desired option and press Enter.
Enter information (for example, the
IP address of the chassis) Type the information and press
Enter.
Return to the previous menu Select the “Return” option at the
bottom of the menu.
or
Press Esc.