Allied Telesis AT-S65 - Manual (Page 18)

Chapter 1: Getting Started
18
The Password prompt is displayed.
4. To configure chassis settings, enter “friend” as the password for a
manager login. To only view the settings, enter “operator” as the
password for the operator login.
The Main Menu is displayed, as shown in Figure 2 on page 15.
Refer to “Using the Menus Interface” on page 19 for information about
how to move through the menus and make menu selections.
Quitting a
Remote
Management
Session
To end a remote management session, return to the Main Menu and
select Quit.
Note
The AT-S65 management software supports only one management
session at a time. Therefore, it is important to always quit a
management session when you are finished managing the chassis.
Otherwise, you might block future management sessions or
software downloads. You can configure a timeout value so that the
chassis automatically disconnects a management session after a
defined period of inactivity. The default timeout is 5 minutes. To
configure a different timeout value, refer to “Specifying a Timeout
Value” on page 50.