Allied Telesis AT-S65 - Manual (Page 27)

AT-S65 Management Software User’s Guide
27
When you choose Enable DHCP, the IP Parameters Menu is refreshed
to show the settings, as shown in Figure 6.
Figure 6. IP Parameters Menu with DHCP Values
4. After you have adjusted the parameters, return to the Main Menu.
IP Parameters Menu
IP Address: [using 145.39.8.189 from DHCP]
Subnet Mask: [using 255.255.255.0 from DHCP]
Gateway Address: [using 149.39.8.1 from DHCP]
Manager Address1: Null (not configured)
Manager Address2: Null (not configured)
Manager Address3: Null (not configured)
Manager Address4: Null (not configured)
Get Community String: public
Set Community String: private
Trap Community String: public
Location: Null (not configured)
Contact: Null (not configured)
Disable DHCP
> Enable DHCP
Return to System Configuration Menu ...