beautypg.com

Enable or disable super ag, Set the radio channel, Set the beacon interval – Allied Telesis AT-WA7400/EU User Manual

Page 330: Set the dtim period

background image

Appendix D: Command Line Interface (CLI) for Access Point Configuration

330

how you would use the CLI to set each one are shown in Table 27.

The following command sets the wireless mode to IEEE 802.11g:

AT-WA7400# set radio wlan0 mode g

Enable or Disable Super AG

You cannot enable/disable Super AG from the CLI. You must set this from
the web UI. For information on how to set this option, please see the field
description for this option in “Configuring Radio Settings” on page 147.

Set the Radio Channel

The following command sets the Channel to 6:

AT-WA7400# set radio wlan0 channel 6

Set the Beacon Interval

The following command sets the beacon interval to 80.

AT-WA7400# set radio wlan0 beacon-interval 80

Set the DTIM Period

The Delivery Traffic Information Map (DTIM) period indicates how often
wireless clients should check to see if they have buffered data on the
access point awaiting pickup. The measurement is in beacons. Specify a
DTIM period within a range of 1 - 255 beacons. For example, if you set this
to “1,” clients will check for buffered data on the access point at every
beacon. If you set this to “2,” clients will check on every other beacon.

The following command sets the DTIM interval to 3.

Table 27. Radio Mode Commands

Function

Command

IEEE

802.11b

set radio wlan0 mode b

IEEE

802.11g

set radio wlan0 mode g

IEEE

802.11a

set radio wlan0 mode a

Atheros Turbo 5 GHz

set radio wlan0 mode turbo-a

Atheros Dynamic Turbo 5 GHz

set radio wlan0 mode dynamic-
turbo-a

Atheros Turbo 2.4 GHz

set radio wlan0 mode turbo-g

Atheros Dynamic Turbo 2.4 GHz

set radio wlan0 mode dynamic-
turbo-g