Allied Telesis AT-WA7400/EU - Manual (Page 267)

AT-WA7400 Management Software User’s Guide
267
Wireless Neighborhood No Yes, as described in Chapter 7,
“Wireless Neighborhoods” on
page 79.
Displaying Status Yes Yes
Ethernet (Wired) Interface Yes
You can configure all
Ethernet (Wired) settings
from the CLI except the
Connection Type.
To change the Connection
Type from DHCP to Static
IP addressing (or vice
versa), you must use the
web UI. Yes
Setting Up the Wireless
Interface Yes Yes
Setting Up Security Yes Yes
Enabling and Configuring the
Guest Login Welcome Page Yes Yes
Configuring Multiple BSSIDs on
Virtual Wireless Networks Yes Yes
Radio Settings Yes
You can configure all radio
settings from the CLI except
for turning on/off Super AG. Yes
MAC Filtering Yes Yes
Load Balancing Yes Yes
Quality of Service Yes Yes
Wireless Distribution System Yes Yes
Time Protocol Yes Yes
Rebooting the Access Point Yes Yes
Resetting the Access Point to
the Factory Defaults Yes Yes
Upgrade the Firmware No Yes, as described in “Upgrading
the Firmware” on page 207.
Table 2. Comparison of CLI to Web Browser Interface Settings (Continued)
Feature or Setting Configurable from CLI Configurable from Web