beautypg.com

Snmp firmware upgrade – Allied Telesis AT-WA7400/EU User Manual

Page 209

background image

AT-WA7400 Management Software User’s Guide

209

SNMP Firmware Upgrade

To upgrade the firmware using SNMP, perform the following procedure:

1. From the main menu, select Advanced > SNMP Firmware Upgrade.

The Configure SNMP Firmware Upgrade page is shown in Figure 65.

Figure 65. Configure SNMP Firmware Upgrade Page

2. For the SNMP Firmware option, click Enabled.

3. In the TFTP Server IP Address field, enter the IP address of the

server where the software is located.

4. In the Firmware Filename field, enter the path and file name of the file

you want to download.

5. Click Upgrade Firmware.

Wait about five minutes for the upgrade to complete.

See also other documents in the category Allied Telesis Computer hardware: