beautypg.com

Configuring wds settings – Allied Telesis AT-WA7400/EU User Manual

Page 178

background image

Chapter 16: Configuring the Wireless Distribution System (WDS)

178

Configuring WDS Settings

You must configure the WDS settings for each access point intended to
receive hands-off and send information from the sending access point.

To configure WDS on an AT-WA7400 Access Point, perform the following
procedure:

1. From the main menu, select Advanced > Wireless Distribution

System.

The Wireless Distribution System page is shown in Figure 52 on page
179.

Note

Figure 52 shows the WDS settings page for the two-radio access
point. The web page for the one-radio access point will look slightly
different.