Allied Telesis AT-WA7400/EU - Manual (Page 168)

Chapter 15: Configuring Quality of Service (QoS)
168
The Quality of Service page is shown in Figure 49.
Figure 49. Quality of Service Page
The Quality of Service page has three sections:
ˆ AP EDCA parameters
ˆ Wi-FI Multimedia (WMM)
ˆ Station EDCA Parameters
The following procedures describe how to configure the parameters in
these sections.
Configuring AP
EDCA
Parameters
AP Enhanced Distributed Channel Access (EDCA) Parameters affect
traffic flowing from the access point to the client station. To configure
these parameters, perform the following procedure:
1. In the AP EDCA parameters section of the Quality of Service page,
configure the following parameters:
Queue
Queues are defined for different types of data transmitted from access
point-to-station:
Data 0 (Voice) - High priority queue, minimum delay. Time-sensitive
data such as VoIP and streaming media are automatically sent to this
queue.
Data 1(Video) - High priority queue, minimum delay. Time-sensitive
video data is automatically sent to this queue.