Allied Telesis AT-S63 User Manual
Page 74
Chapter 4: SNMPv1 and SNMPv2c
74
Section I: Basic Operations
4. In the SNMPv1 & SNMPv2c section, click View.
The SNMPv1 & SNMPv2c Communities tab is shown in Figure 19.
Figure 19. SNMPv1 & SNMPv2c Communities Tab (Monitoring)
The SNMPv1 & SNMPv2c Communities tab displays a table that
contains the following columns of information:
Community Name
The SNMP community name.
Access Mode
The access mode for access to that community. The possible settings
are Read Only and Read/Write.
Manager Stations
The IP addresses of the management stations that are allowed SNMP
access to the switch using a community string. This only applies if the
community string has a closed status.
Trap Receivers
The IP addresses of up to 8 trap receivers on your network that can
receive traps from the switch.
Open Access
The status of access to the SNMP community by a management
station, one of the following settings:
Yes - The community string has an open status, meaning that any
management station can access the SNMP community.
No - The community string has an closed status, meaning that access
to the SNMP community is only available to those management
stations whose IP addresses are assigned to the community string.