Allied Telesis AT-S63 - Manual (Page 141)

Section II: Advanced Operations 141
Chapter 11
Event Logs and Syslog Servers
This chapter describes how to view or save the contents of the event logs
and how to create a log output to send events to a syslog server. The
event logs allow you to view information about switch activity. Sections in
the chapter include:
ˆ “Working with the Event Logs” on page 142
ˆ “Working with Log Outputs” on page 152
For background information on these features, refer to Chapter 13, “Event
Logs and Syslog Servers,” in the AT-S63 Management Software Menus
Interface User’s Guide.
Note
The event logs, even when disabled, log all AT-S63 initialization
events that occur when the switch is reset or power cycled. Any
switch events that occur after AT-S63 initialization are entered into
the logs only if you enable the event log feature. The default setting
for the event logs is disabled.