Allied Telesis AT-S63 - Manual (Page 443)

AT-S63 Management Software Web Browser Interface User’s Guide
Section VII: Management Security 443
Global Server Timeout
This parameter specifies the maximum amount of time the switch waits
for a response from a TACACS+ server before assuming the server
cannot respond. If the timeout expires and the server has not
responded, the switch queries the next TACACS+ server in the list. If
there no more servers, the switch defaults to the standard Manager
and Operator accounts. The default is 30 seconds. The range is 1 to
30 seconds.
IP Address, Port #, and Encryption Key
Use these fields to specify the IP address, UDP port number, and
encryption key of each RADIUS server. You can specify up to a
maximum of three servers. You can leave the encryption field blank if
you entered the server’s key in the Global Secret field. The maximum
length of the encryption key is 39 characters.
5. Click Apply.
6. From the Configuration menu, select the Save Config option to
permanently save your changes. (This option is not displayed if there
are no changes to save.)