Allied Telesis AT-S63 - Manual (Page 224)

Chapter 17: IGMP Snooping
224 Section II: Advanced Operations
Multicast Router Ports Mode
How the router ports are determined. The possible settings are:
Auto-Detect - The switch determines the ports automatically.
Port number - The selected router ports.
Host/Router Timeout Interval
The time period in seconds after which the switch determines that a
host node has become inactive.
Maximum Multicast Groups
The maximum number of multicast groups the switch learns.
3. To view the multicast addresses and the host nodes, click View
Multicast Hosts List and then click View.
The View Multicast Hosts List is shown in Figure 86.
Figure 86. View Multicast Hosts List Page
The View Multicast Hosts List page displays a table that contains the
following columns of information:
Multicast Group
The multicast address of the group.
VLAN ID
The VID of the VLAN in which the port is an untagged member.
Member Port
The port(s) on the switch to which one or more host nodes of the
multicast group are connected.
Host IP
The IP address(es) of the host node(s) connected to the port.