Allied Telesis AT-S81 User Manual

Page 57

AT-S81 Management Software User’s Guide

Section I: Using the Menus Interface

To transmit the system events to a syslog server, perform the following
procedure:

1. From the Main Menu, type T to select Switch Tools.

2. From the Switch Tools Configuration Menu, type S to select Remote

System Log.

The Remote System Log Menu is shown in Figure 16.

Figure 16. Remote System Log Menu

3. Type S to select Set System Log Server IP Address.

The following prompt is displayed:

Enter IP address of system log server>

4. Type the IP address of the system log server.

5. Type F to select Set System Log Facility.

Enter system log facility (0-7)>

6. Type a number from 0 to 7 that corresponds to the facility number on

your network.

7. Type E to select Enable/Disable Remote System Log.

The following prompt is displayed:

Enable or Disable remote system log (E/D)>

8. Type E to enable events to be sent to the remote system log, or D to

disable this feature.

AT-8000/8POE Local Management System
Switch Tools Configuration -> Remote System Log Menu

Remote System Log Status:

Disabled

System Log Server IP Address:

0.0.0.0

System Log Facility:

----------------------------- ----------------------------------
[E]nable/Disable Remote System Log

Set System Log [S]erver IP Address

Set System Log [F]acility

[Q]uit to previous menu

Command>