Allied Telesis AT-S81 - Manual (Page 333)

AT-S81 Management Software User’s Guide
Section I: Basic Features 333
EXEC command mode, but you cannot enter this command from the
VLAN Configuration mode.
Command
Formatting
Conventions
The following formatting conventions are used in this manual:
ˆ screen text font - This font illustrates the format of a command and
command examples.
ˆ screen text font - Italicized screen text indicates a variable for you
to enter.
ˆ [ ] - Brackets indicate optional parameters.
ˆ | - Vertical line separates parameter options for you to choose from.
See the following sections for a description of each command mode,
including a list of the commands available from each mode.
ˆ “User EXEC Command Mode” on page 334
ˆ “Privileged EXEC Command Mode” on page 335
ˆ “Global Configuration Command Mode” on page 335
ˆ “Interface Configuration Command Mode” on page 337
ˆ “VLAN Configuration Command Mode” on page 339
Table 9. Command Modes
Command
Mode
Prompt Enter and Exit Commands
User EXEC
mode Switch> ˆ Access this command mode by typing “C” at the Main
Menu. This is the default command mode.
ˆ Enter the LOGOUT or EXIT commands to quit the
command mode and return to the Main Menu.
Privileged
EXEC mode Switch# ˆ Access this mode from the User EXEC mode with the
ENABLE command.
ˆ Enter the DISABLE or EXIT commands to return to
the User EXEC mode.
ˆ Enter the LOGOUT command to quit the command
mode and return to the Main Menu.
Global
Configuration
mode Switch(config)# ˆ Enter the CONFIGURE command to enter this mode
from the Privileged EXEC mode.
ˆ Enter the END or EXIT commands to return to the
Privileged EXEC mode.
ˆ Enter the LOGOUT command to quit the command
mode and return to the Main Menu.