Allied Telesis AT-S81 - Manual (Page 195)

AT-S81 Management Software User’s Guide
Section I: Using the Menus Interface 195
Configuring Broadcast Storm Control
To configure the broadcast storm control feature, perform the following
procedure:
1. From the Main Menu, type B to select Basic Switch Configuration.
The Basic Switch Configuration Menu is shown in Figure 4 on page 32.
2. From the Basic Switch Configuration Menu, type C to select Storm
Control Configuration.
The Storm Control Configuration Menu is shown in Figure 51.
Figure 51. Storm Control Configuration Menu
3. Type B to select Broadcast Storm Status.
The following prompt is displayed:
Enable or Disable broadcast storm control (E/D)>
4. Type E to enable broadcast storm control or D to disable broadcast
storm control.
5. If you are activating the feature, type T to select Threshold.
The following prompt is displayed:
Enter threshold level>
6. Specify the broadcast threshold. Choices are:
ˆ H for High (3000 broadcast packets per second)
ˆ M for Medium (500 broadcast packets per second)
AT-8000/8POE Local Management System
Basic Switch Configuration -> Storm Control Configuration Menu
Broadcast Storm Status : Disabled
Threshold : Low
----------------------- -----------------------------
Set [B]roadcast Status
Set [T]hreshold
[Q]uit to previous menu
Command>