Allied Telesis AT-S81 - Manual (Page 265)

AT-S81 Management Software User’s Guide
Section II: Web Browser Interface 265
The LACP Group Status page opens, as shown in Figure 79.
Figure 79. LACP Group Status Page
The LACP Group Status page displays the following information about
each LACP group:
System Priority
The system priority as defined by IEE 802.3ad. You cannot change
this.
System ID
The MAC address of the system.
Key
The key for this trunk group.
The menu also contains a table that displays the following information:
Aggregator
The port that is operating as the aggregator.
Attached Port List
The ports assigned to the aggregator.
Disabling an
LACP Trunk
To disable an LACP trunk, perform the following procedure:
1. From the Advanced Config menu, select Trunk Config > Trunk
Config.
The Trunk Configuration page is shown in Figure 77.