Allied Telesis AT-S81 User Manual

Management software, User’s guide

Text mode
Original mode

613-000240 Rev. B

Management
Software

AT-S81

User’s Guide

For the AT-8000/8POE Layer 2 Fast Ethernet Switch

Version 1.1.0

Table of contents

Document Outline

Contents
- Figure 1. Connecting the Management Cable to the Console Port 26
- Figure 2. Login Menu 27
- Figure 3. Main Menu 27
- Figure 4. Basic Switch Configuration Menu 32
- Figure 5. System IP Configuration Menu 33
- Figure 6. System Admin. Configuration Menu 36
- Figure 7. User Interface Configuration Menu 38
- Figure 8. SNTP Configuration Menu 44
- Figure 9. Time Zone Configuration Menu 45
- Figure 10. General Information Menu 47
- Figure 11. Switch Tools Configuration Menu 50
- Figure 12. System Reboot Menu 51
- Figure 13. Ping Execution Menu 52
- Figure 14. Ping Results 54
- Figure 15. System Log Menu 55
- Figure 16. Remote System Log Menu 57
- Figure 17. Port Configuration Menu 62
- Figure 18. Statistics Menu 68
- Figure 19. SNMP Configuration Menu 75
- Figure 20. Static Port Trunk Example 82
- Figure 21. Advanced Switch Configuration Menu 87
- Figure 22. Trunk Configuration Menu 88
- Figure 23. LACP Port Priority Menu 92
- Figure 24. LACP Group Status Menu 94
- Figure 25. Port Mirroring Menu 99
- Figure 26. Power Over Ethernet Menu 107
- Figure 27. VLAN - Example 2 117
- Figure 28. Example of a Tagged VLAN 119
- Figure 29. VLAN Management Menu 122
- Figure 30. VLAN Creation Menu 123
- Figure 31. Config VLAN Member Menu 126
- Figure 32. GVRP Example 131
- Figure 33. Quality of Service Configuration Menu 137
- Figure 34. Traffic Class Configuration Menu 138
- Figure 35. Port Priority Configuration Menu 141
- Figure 36. IGMP Configuration Menu 148
- Figure 37. MAC Address DIsplayed on IGMP Configuration Menu 151
- Figure 38. View Group Members Menu 151
- Figure 39. Point-to-Point Ports 158
- Figure 40. Edge Port 159
- Figure 41. Point-to-Point and Edge Port 159
- Figure 42. VLAN Fragmentation 160
- Figure 43. RSTP Configuration Menu 161
- Figure 44. RSTP Basic Port Configuration Menu 167
- Figure 45. RSTP Advanced Port Configuration Menu 170
- Figure 46. Topology Information Menu 172
- Figure 47. Example of the Authenticator Role 178
- Figure 48. Authentication Across Multiple Switches 181
- Figure 49. Port Based Access Control Configuration Menu 182
- Figure 50. RADIUS Server Configuration Menu 189
- Figure 51. Storm Control Configuration Menu 195
- Figure 52. MAC Address Table Menu 200
- Figure 53. Display MAC Addresses by Port Menu 201
- Figure 54. Display MAC Addresses by Port Menu 202
- Figure 55. Display MAC Addresses by VLAN ID Menu 203
- Figure 56. Software Upgrade Menu (1 of 2) 207
- Figure 57. Software Upgrade Menu (2 of 2) 207
- Figure 58. Configuration File Upload/Download Menu 210
- Figure 59. TFTP Configuration File Upload/Download Menu 210
- Figure 60. Entering a Switch’s IP Address in the URL Field 216
- Figure 61. AT-S81 Login Dialog Box 217
- Figure 62. Home Page for the AT-8000/8POE 217
- Figure 63. IP Configuration Page 222
- Figure 64. Administration Configuration Page 225
- Figure 65. User Interface Page 227
- Figure 66. SNTP Configuration Page 232
- Figure 67. Switch Information Page 233
- Figure 68. System Reboot Configuration Page 235
- Figure 69. Ping Test Configuration Page 236
- Figure 70. Ping Test Results Page 237
- Figure 71. System Log Page 238
- Figure 72. Remote System Log Page 240
- Figure 73. Port Configuration Page 244
- Figure 74. Configuration of Port Page 247
- Figure 75. Statistics Page 250
- Figure 76. SNMP Configuration Page 255
- Figure 77. Trunk Configuration Page 260
- Figure 78. LACP Port Priority Page 264
- Figure 79. LACP Group Status Page 265
- Figure 80. Port Mirroring Page 268
- Figure 81. Power Over Ethernet Configuration Page 272
- Figure 82. Create VLAN Page 276
- Figure 83. PVID Page 278
- Figure 84. VLAN Information Page 280
- Figure 85. VLAN Configuration - Members Page 281
- Figure 86. Modify VLAN Page 282
- Figure 87. Traffic Class Configuration Page 288
- Figure 88. Port Priority Configuration Page 290
- Figure 89. IGMP Snooping Page 294
- Figure 90. IGMP Snooping - Group Members Page 295
- Figure 91. Rapid Spanning Tree Configuration Page 298
- Figure 92. RSTP Basic Port Configuration Page 302
- Figure 93. RSTP Advanced Port Configuration Page 303
- Figure 94. Designated Topology Information Page 305
- Figure 95. 802.1x Configuration Page 308
- Figure 96. RADIUS Configuration Page 312
- Figure 97. Broadcast Storm Control Page 314
- Figure 98. MAC Address by Port Page 316
- Figure 99. MAC Address Table by Port 317
- Figure 100. MAC Address by MAC Page 318
- Figure 101. MAC Addresses by VLAN Page 319
- Figure 102. MAC Addresses by VLAN 320
- Figure 103. Image Upgrade Page 324
- Figure 104. Configuration File Upload/Download Page 326
- Figure 105. Main Menu 341
- Figure 106. Command Line Prompt, User Executive Mode 341
Figures
- Table 1. Menus Interface Operations 28
- Table 2. Power Classes for Powered Devices 105
- Table 3. Default Mappings of IEEE 802.1p Priority Levels to Egress Port Priority Queues 135
- Table 4. RSTP Auto-Detect Port Costs 156
- Table 5. RSTP Auto-Detect Port Trunk Costs 156
- Table 6. Port Priority Value Increments 157
- Table 7. RSTP Point-to-Point Status 171
- Table 8. RSTP Point-to-Point Status 303
- Table 9. Command Modes 333
- Table 10. User EXEC Command Mode Commands 334
- Table 11. Privileged EXEC Command Mode Commands 335
- Table 12. Global Configuration Command Mode Commands 335
- Table 13. Interface Configuration Command Mode Commands 337
- Table 14. VLAN Configuration Command Mode Commands 339
- Table 15. Command Line Syntax Conventions 342
Tables
Preface
- Where to Find Web-based Guides
- Contacting Allied Telesis
Chapter 1
Overview
- Management Overview
- Local Connection
- Remote Connection
  - Using an SNMP Network Management Application
- Management Access Level
Section I
Using the Menus Interface
Chapter 2
Getting Started with the Menus Interface
- Starting a Local Management Session
- Using the Menus Interface
- Quitting from a Local Management Session
Chapter 3
Basic Switch Parameters
- Configuring the IP Address, Subnet Mask, and Gateway Address
- Enabling and Disabling the DHCP Client
- Configuring System Administration Information
- Setting the User Interface Configuration
- Disabling or Enabling the Web Server
- Disabling or Enabling the Telnet Server
- Configuring SNTP
- Viewing Switch Information
- Rebooting the Switch
- Pinging a Remote System
- Working with the System Log
  - Viewing the System Log
  - Sending the System Log to a Remote Server
- Returning the AT-S81 Management Software to the Factory Default Values
Chapter 4
Port Configuration
- Displaying the Port Parameters
- Enabling and Disabling a Port
- Setting a Port’s Speed and Duplex Mode
- Changing the Flow Control Setting
- Displaying Port Statistics
Chapter 5
SNMP
- SNMP Overview
  - Default SNMP Community Strings
- Enabling or Disabling the SNMP Agent
- Enabling Authentication Traps
- Changing the Default SNMP Community Names
- Working with Trap Receivers
Chapter 6
Port Trunking
- Port Trunking Overview
  - Static Port Trunk Overview
  - Port Trunking Guidelines
- LACP Trunks
- Setting Up a Port Trunk
- Setting Up an LACP Trunk
Chapter 7
Port Mirroring
- Port Mirroring Overview
- Configuring Port Mirroring
- Enabling or Disabling Port Mirroring
Chapter 8
Power Over Ethernet
- PoE Overview
- Configuring PoE
Chapter 9
Virtual LANs and GVRP
- VLAN Features
- VLAN Overview
- Working with VLANS
- GVRP
Chapter 10
Quality of Service (QoS)
- QoS Overview
- Mapping CoS Priorities to Egress Queues
- Configuring CoS
Chapter 11
IGMP Snooping
- IGMP Snooping Overview
- Configuring IGMP
- Viewing the Multicast Groups
Chapter 12
Rapid Spanning Tree Protocol (RSTP)
- RSTP Overview
- Enabling or Disabling RSTP
- Configuring the RSTP Bridge Settings
- Configuring STP Compatibility
- Configuring RSTP Port Settings
  - Configuring the Basic RSTP Port Settings
  - Configuring the Advanced RSTP Port Settings
- Displaying the RSTP Topology
Chapter 13
802.1x Network Access Control
- 802.1x Network Access Control Overview
- Configuring 802.1x Network Access Control
Chapter 14
RADIUS Authentication Protocol
- RADIUS Overview
  - RADIUS Implementation Guidelines
- Configuring the RADIUS Server
- Displaying the RADIUS Server Settings
Chapter 15
Broadcast Storm Control
- Broadcast Storm Control Overview
- Configuring Broadcast Storm Control
Chapter 16
MAC Address Tables
- MAC Address Overview
- Displaying the MAC Address Tables
- Setting the Age-Out Time
Chapter 17
Working With System Files
- Downloading a New Management Software Image Using TFTP
- Uploading or Downloading the Configuration File
  - Uploading the Configuration File
  - Downloading a Configuration File
Section II
Using the Web Browser Interface
Chapter 18
Starting a Web Browser Management Session
- Establishing a Remote Connection to Use the Web Browser Interface
- Web Browser Tools
- Quitting a Web Browser Management Session
Chapter 19
Basic Switch Parameters
- Configuring an IP Address, Subnet Mask and Gateway Address
- Enabling and Disabling the DHCP Client
- Configuring System Administration Information
- Setting the User Interface Configuration
- Enabling or Disabling the Web Server
- Enabling or Disabling the Telnet Server
- Configuring SNTP
- Viewing System Information
- Rebooting a Switch
- Pinging a Remote System
- Working with the System Log
  - Viewing the System Log
  - Sending the System Log to a Remote Server
- Returning the AT-S81 Management Software to the Factory Default Values
Chapter 20
Port Configuration
- Viewing and Configuring Multiple Ports
- Viewing and Configuring a Single Port
- Displaying Port Statistics
Chapter 21
SNMP
- Enabling or Disabling the SNMP Agent
- Changing the Default SNMP Community Names
- Working with Trap Receivers
Chapter 22
Port Trunking
- Setting Up a Port Trunk
- Setting Up an LACP Trunk
Chapter 23
Port Mirroring
- Configuring Port Mirroring
- Disabling Port Mirroring
Chapter 24
Power Over Ethernet
- Configuring PoE
  - Changing the PoE Port’s Admin Setting
  - Setting the PoE Port’s Priority
Chapter 25
Virtual LANs
- Creating a VLAN
- Configuring the PVID of Untagged Ports
- Displaying the VLANs
- Modifying a VLAN
- Deleting a VLAN
- Deleting All VLANs
- Enabling or Disabling GVRP
Chapter 26
Quality of Service (QoS)
- Mapping CoS Priorities to Egress Queues
- Configuring CoS
Chapter 27
IGMP
- Configuring IGMP
- Viewing the Multicast Group Members
Chapter 28
RSTP
- Enabling or Disabling RSTP and STP Compatibility
- Basic RSTP Configuration
- Configuring RSTP Port Settings
  - Configuring the Basic RSTP Port Settings
  - Configuring the Advanced RSTP Port Settings
- Viewing the RSTP Topology
Chapter 29
802.1x Network Access Control
- Configuring 802.1x Network Access Control
Chapter 30
RADIUS Authentication Protocol
- Configuring the RADIUS Client
Chapter 31
Broadcast Storm Control
- Configuring Broadcast Storm Control
Chapter 32
MAC Address Tables
- Displaying the MAC Address Tables
  - Displaying the MAC Addresses by MAC
  - Displaying the MAC Addresses by VLAN ID
- Setting the Aging Time
Chapter 33
Working With System Files
- Downloading a New Management Software Image Using TFTP
- Uploading or Downloading the Configuration File
Section III
Using the Command Line Interface
Chapter 32
Getting Started with the Command Line Interface
- CLI Command Modes Introduction
- Starting the Command Line Interface
- Command Formatting
  - Command Line Interface Features
  - Command Line Syntax Conventions
Appendix A
AT-S81 Default Settings
- Basic Switch Default Settings
- SNMP Default Settings
- Port Configuration Default Settings
- Quality of Service
- IGMP Snooping Default Settings
- RSTP Default Settings
- 802.1x Network Access Control Default Settings
- RADIUS Server Default Settings
- Broadcast Storm Control Default Settings
Index
- Numerics
- A
- B
- C
- D
- E
- F
- G
- H
- I
- K
- L
- M
- P
- Q
- R
- S
- T
- U
- V
- W