Allied Telesis AT-S81 - Manual (Page 240)

Chapter 19: Basic Switch Parameters
240 Section II: Web Browser Interface
1. From the Tools menu, select Remote System Log.
The Remote System Log page opens, as shown in Figure 72.
Figure 72. Remote System Log Page
2. Configure the following parameters:
System Log Server IP Address
The IP address of the server where you want to store the system log.
System Log Facility
Select a number for the system log facility on the server, from 0
through 7.
3. For the Remote System Log Status parameter, choose one of the
following from the list:
Disabled - To disable remote system logging.
Enabled - To enable remote system logging.
4. Click Apply.