Allied Telesis AT-S81 - Manual (Page 285)

AT-S81 Management Software User’s Guide
Section II: Web Browser Interface 285
Deleting All VLANs
The following procedure for deletes all VLANs, except the Default_VLAN,
on a switch. To delete selected VLANs, refer to “Deleting a VLAN” on
page 284.
To reset to the default VLAN, perform the following procedure:
1. From the Advanced Config menu, select VLAN Info.
The VLAN Information page is shown in Figure 84 on page 280.
2. Click Reset to Default.
The following prompt is displayed:
Reset VLAN configuration to default?
3. Click OK to continue or click Cancel to stop the changes.
The VLAN Information page is redisplayed with ALL VLANs, except
the default, deleted.