Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 96)

AlliedView™-EMS 3.11 Device Manager User’s Guide Page 96 of 130
7.2.7.2 Display Data Type of Chart
Specifies how to display data on the graph or chart. You can select one from the following
options.
Absolute Value
Displays a value as it is.
Per Sample
Displays the change in the value between the two pollings. This is Current value -
Previous value.
Per Second
Displays the change in the value per second. This is (Current value - Previous value)
/ Polling Interval.
Note - Calculated values are rounded. For example, Number of Error packets is usually very
small so that calculated value is likely to be zero.
7.2.7.3 Regist Menu
Add this window to the user-defined menu (User Menu).
7.2.7.4 Save Polling Data
This button opens the Polling Data Save dialog box used to save collected data to a file.
Specify the name and format of the file in which the data is saved. Select a file format from
the options below. To start saving the data, click OK.
When you start saving data, the button's label changes to "Saving polled data". To close the
file and stop saving the data, click the "Saving polled data" button.
CSV Format
Save the data in comma-separated values (CSV) format.
TAB Format
Save the data in Tab-separated values (TSV) format.
Note - Only the values of the collected RMON variables are saved. Values Device Manager
calculates from these collected values are not saved.
7.2.7.5 Start Snapshot
Clicking this button opens the Start Snapshot window. Use this window to create an image
of the graph and tables in the RMON tab panel in HTML format. Use the 'Browse' button
to select the directory or folder where you want to save the image.