Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 38)

AlliedView™-EMS 3.11 Device Manager User’s Guide Page 38 of 130
This is the SNMPv3 User Account to be used for accessing the MIB of the target
device. Make sure to specify a User Account that has already been configured on the
target device.
Security Level
This is the Security Level for the User Account Name that you have specified. Make
sure to set the Security Level to be the same as what is configured on the target
device.
These are the available Security Levels:
No Auth / No Priv
This Security Level uses no authentication and no privacy.
Auth / No Priv
This Security Level uses authentication without privacy.
Auth / Priv
This Security Level uses authentication and privacy.
Authentication Protocol
If the Security Level is "Auth / No Priv" or "Auth / Priv", you need to specify an
Authentication Protocol. Make sure to set the Authentication Protocol to be the
same as what is configured on the target device.
These are the available Authentication Protocols:
MD5
Use HMAC-MD5-96 protocol
SHA
Use HMAC-SHA-96 protocol
Authentication Password
If the Security Level is "Auth / No Priv" or "Auth / Priv", you need to specify an
Authentication Password. Make sure to set the Authentication Password to be the
same as what is configured on the target device.
Privacy Protocol
If the Security Level is "Auth / Priv", you need to specify a Privacy Protocol. This is
the available Privacy Protocol:
DES
Use Data Encryption Standard