Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 9)

AlliedView™-EMS 3.11 Device Manager User’s Guide Page 9 of 130
DisplayName
Titlebar string.
UserName
User account name to be used for accessing the MIB. This is required when using
SNMPv3.
SecLevel
Security level that is configured for the User Name. This is required when using
SNMPv3.
AuthProtocol
Authentication protocol that is configured for the User Name. This is required when
using SNMPv3.
AuthPassword
Authentication password that is configured for the User Name. This is required
when using SNMPv3.
PrivProtocol
Privacy protocol that is configured for the User Name. This is required when using
SNMPv3.
PrivPassword
Privacy password that is configured for the User Name. This is required when using
SNMPv3.
TrapVersion
SNMP Trap version to be used.
2.1.2 Target Host
The target host can be specified by entering the IP address of the device or its host name.
Examples:
devicemanager -TargetHost 172.16.99.123
devicemanager -TargetHost dvcmgrhub
2.1.3 SNMP Version
The Device Manager can use SNMPv1, SNMPv2c and SNMPv3. You may specify a value of 1,
2 or 3. If the SNMP Version is not specified, the default value of 1 (SNMPv1) will be used.