Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT User Manual

Page 36

Text mode
Original mode

AlliedView™-EMS 3.11 Device Manager User’s Guide

Page 36 of 130

Select Target Host dialog box

Target host

The host name or the IP address of the target host. To see the description of the

host, fill in host name or IP address and click Confirm. To connect to the host, click
OK.

Note

- If "v3" is the selected SNMP version and the specified user account has no

READ VIEW access to the System Description OID but has READ VIEW access to
the System Object ID, clicking on the confirm button will display the message,

"Unable to retrieve system description."

SNMP Options

Version

This drop down list allows you to select the SNMP version to use in managing the

target device.

Note

- Before choosing "v2c" or "v3", make sure that the target device you are

connecting to supports SNMP v2c and/or SNMP v3 respectively.