Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT User Manual

Page 61

Text mode
Original mode

AlliedView™-EMS 3.11 Device Manager User’s Guide

Page 61 of 130

Note

- It takes times to get values for many variables. To improve performance, you

can limit the number of variables to be displayed to about 10. You can further
improve performance by increasing the polling interval when the volume of the data

is high.

MIB display

MIB set

Sets a value for the MIB variable. Specify a variable and a value to set. You must

specify the variable with an instance number. For example, 'sysDescr.0' or

rptrMonitorPortEntry.1.8' are valid examples. If you specify a variable without an
instance such as 'sysDescr', the set operation cannot be performed.

Note

- The MIB set operation changes the data structure in the device's SNMP agent.

Take care when using this function.