Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT User Manual

Page 18

Text mode
Original mode

AlliedView™-EMS 3.11 Device Manager User’s Guide

Page 18 of 130

Note

- HP-UX : When manually adding an AT-AR255E running firmware v1.0.2 to the

network map in HP OpenView, use the device’s host name, as specified in the local hosts
file, for the Hostname field in the IP Map dialog. Using the device’s IP address instead of its

host name will reset the Hostname field to “RIP2-ROUTERS.MCAST.NET” causing Device

Manager to connect to any RIP2 router present in the network when started within HP
OpenView.

Note

- HP OpenView can only start Device Manager in SNMPv1 mode.