Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 55)

AlliedView™-EMS 3.11 Device Manager User’s Guide Page 55 of 130
"MIB variable" option displays a MIB variable name in its original form.
Examples:
sysDescr.0
sysContact.0
sysName.0
sysLocation.0
"Both" option displays a MIB variable name in both English and its original form.
Examples:
System Description (sysDescr.0)
System Contact (sysContact.0)
System Name (sysName.0)
System Location (sysLocation.0)
Omit Display
In the Edit tab of dialog boxes, where MIB variables can be edited, "Stack#.Port#" is
appended at the end of the MIB variable name. If you want to omit this suffix, check
this box.
The X-axis display name of the chart and graph is displayed with the number
When checked, item names on the graph/chart's x-axis are displayed as numbers
instead of variable names. This option may be useful when you view a lot of variables
on a screen.
Encoding
Specifies the character encoding system to use in sending and receiving SNMP data.
SNMP receive data encoding
Specifies the character encoding of the data received from the device. Your options
are None, Auto detect, Shift JIS, JIS, and EUC.
Note - In some cases, Device Manager may not be able to recognize the SNMP data
encoding format received when "Auto detect" is selected. If this occurs, you will
need to specify the appropriate SNMP data encoding format.