1 starting from castle rock snmpc – Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT User Manual

Page 16

Text mode
Original mode

AlliedView™-EMS 3.11 Device Manager User’s Guide

Page 16 of 130

2.2.1 Starting From Castle Rock SNMPc

To start Device Manager from SNMPc, double-click on a node icon on the map window. If
the node is supported by Device Manager, the main panel of the node is displayed.

Note that Device Manager and SNMPc run independently of each other, so exiting SNMPc
has no effect on Device Manager. Device Manager continues to run even after SNMPc stops
running. To exit Device Manager, select Exit from its File menu.

Starting from SNMPc

Note

- SNMPv3: In order to start Device Manager in SNMPv3 mode, the node's Read/Write

Access Mode

attribute should be set to SNMP V3 No-Auth, SNMP V3 Auth-MD5, SNMP V3

Auth-SHA

, SNMP V3 Priv Auth-MD5, or SNMP V3 Priv Auth-SHA, depending on the SNMPv3

settings configured on the target device.