Allied Telesis AT-GS950/8 - Manual (Page 58)

Chapter 2: Basic Switch Configuration
58
System Log Configuration
The System log is designed to monitor the operation the AT-GS950/8
switch by recording the event messages it generates during normal
operation. These events may provide vital information about system
activity that can help in the identification and solutions of system
problems.
To configure the System log, perform the following procedure:
1. From the main menu on the left side of the page, click the System
folder.
The System folder expands.
2. From the System folder, select System Log Configuration.
The System Log Configuration Page is displayed. See Figure 21.
Figure 21. System Log Configuration Page