Allied Telesis AT-GS950/8 - Manual (Page 291)

AT-GS950/8 Web Interface User Guide
291
Histories
RMON histories are snapshots of port statistics. They are taken by the
switch at predefined intervals and can be used to identify trends or
patterns in the numbers or types of ingress packets on the ports on the
switch. The snapshots can be viewed with your SNMP NMS software with
the history group of the RMON portion of the MIB tree.
A history group is divided into buckets. Each bucket stores one snapshot
of statistics of a port. A group can have from 1 to 50 buckets. The more
buckets in a group, the more snapshots it can store.
Perform the following procedure to configure RMON history:
1. From the main menu on the left side of the page, click the RMON
folder.
The RMON folder expands.
2. From the RMON folder, select History.
The History Control Configuration Page is displayed. See Figure 104.
Figure 104. History Control Configuration Page
3. The following fields are listed:
Index - This parameter specifies the ID number of the new group.
The range is 1 to 65535.
Port - This parameter specifies the port where you want to monitor
the statistical information of the Ethernet traffic.
Buckets Requested - This parameter defines the number of
snapshots of the statistics for the port. Each bucket can store one
snapshot of RMON statistics. Different ports can have different
numbers of buckets. The range is 1 to 50 buckets.