Allied Telesis AT-GS950/8 - Manual (Page 31)

AT-GS950/8 Web Interface User Guide
31
System Time
The procedures in this section describe how to configure the system time
by manually entering the time or through SNTP and how to configure the
daylight savings time feature. See the following sections:
 “Manually Setting System Time” on page 31
 “Setting SNTP” on page 32
 “Setting Daylight Savings Parameters” on page 33
Manually Setting
System Time
To set the system time manually, perform the following procedure:
1. From the main menu on the left side of the page, click the System
folder.
The System folder expands.
2. From the System folder, select System Time.
The System Time Page is displayed. See Figure 7.
Figure 7. System Time Page