Allied Telesis AT-GS950/8 - Manual (Page 194)

Chapter 13: Access Control Configuration
194
Delete Out-
Profile Action
To delete a Out-Profile action entry, perform the following procedure:
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.
2. From the Access Control Config folder, select Out-Profile Action.
An example of the Create Out-Profile Action page with a Out-Profile
Action table entry is shown in Figure 69 on page 192.
3. From the Create Out-Profile Action page, identify which Out-Profile
action table entry that want to delete and click the Delete button in the
Action column.
You will be prompted with a message saying, “Do you want to delete
Out-Profile Action xx?” (where xx is the classifier index).
4. Click on the OK button.
The Out-Profile action entry is deleted from the Out-Profile action
table.
5. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.