Allied Telesis AT-GS950/8 - Manual (Page 110)

Chapter 7: Voice VLAN
110
Modify OUI
Setting
To modify or delete an OUI, it must be first be deleted and then re-entered
by following the procedure in “Create OUI Setting” on page 109.
Delete OUI
Setting
To delete an OUI, perform the following procedure:
1. From the main menu on the left side of the page, select Bridge.
The Bridge folder expands.
2. From the Bridge folder, select Voice VLAN.
The Voice VLAN folder expands.
3. From the Voice VLAN folder, select Voice VLAN OUI Setting.
The Voice VLAN OUI Setting Page is displayed. See Figure 35 on
page 109.
4. To delete a specific OUI that had already been entered in the table at
the bottom of the page, click on Delete in the Action column of the
table. The specific OUI will be deleted from the table.
5. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.