Allied Telesis AT-GS950/8 - Manual (Page 232)

Chapter 16: DHCP Snooping
232
Modify VLAN
Setting
To modify or delete a VLAN ID, it must first be deleted and then re-entered
by following the procedure outline in “Create VLAN Setting” on page 231.
Delete VLAN
Setting
To delete a VLAN ID, perform the following procedure:
1. From the main menu on the left side of the page, select DHCP
Snooping.
The DHCP Snooping folder expands.
2. From the DHCP Snooping folder, select VLAN Settings.
The VLAN Settings page is displayed. See Figure 84 on page 231.
3. To delete a specific VLAN ID that had already been entered in the
table, click on Delete in the Action column of the table. The specific
VLAN ID will be deleted from the table.
4. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.