Allied Telesis AT-GS950/8 - Manual (Page 40)

Chapter 2: Basic Switch Configuration
40
User Name and Password Configuration
Password protection is always enabled for access to the AT-S107
Management software. This section explains how to create new users
names and passwords and how to modify or delete existing users for the
web interface. See the following sections:
 “Add New User Name and Password” on page 40
 “Modify User Name and Password” on page 41
 “Delete User Name and Password” on page 42
Add New User
Name and
Password
The default User Name and Password is “manager” and “friend” - both
without the quotes. To configure new User Name and Password
information, perform the following procedure:
1. From the main menu on the left side of the page, click the System
folder.
The System folder expands.
2. From the System folder, select Administration.
The Administration Page is displayed. See Figure 10.
Figure 10. Administration Page
3. To create a user name, enter a user name in the box next to the User
Name field.
You can enter a value of up to 12 alphanumeric characters. The User
Name field is case sensitive.