Allied Telesis AT-GS950/8 - Manual (Page 362)

Appendix A: AT-GS950/8 Default Parameters
362
Historical Status
Auto Refresh 5 seconds 5/10/15/30 seconds
Historical Status
Port 1 port 1 - 8
Historical Status
Color Green 12 colors
Tools
Firmware Upgrade via
HTTP
Firmware File none -
Firmware Upgrade via
TFTP
TFTP Server IP 0.0.0.0 IPv4 address in xxx.xxx.xxx.xxx hex format; except
127.0.0.1
Firmware Upgrade via
TFTP
Image File Name none 1 - 30 characters (special characters are dependent on
OS file name limitation)
Firmware Upgrade via
TFTP
Retry Count 5 1 - 20
Configuration File
Upload/Download via
HTTP
Select File none -
Configuration File
Upload/Download via
TFTP
TFTP Server IP 0.0.0.0 IPv4 address in xxx.xxx.xxx.xxx hex format; except
127.0.0.1
Configuration File
Upload/Download via
TFTP
Config File Name none 1 - 39 characters (special characters are dependent on
OS file name limitation)
Cable Diagnostics
Port 1 port 1 - 8
LED ECO Mode Disable Enable/Disable
Reboot
Factory Default Reset Enable Enabled/Disabled
Table 9. AT-S107 Management Software Default Settings (Continued)
Parameter
AT-GS950/8
Default Setting
Specifications