Allied Telesis AT-TQ2450 - Manual (Page 55)

AT-TQ2450 Wireless Access Point Installation Guide
55
Setting the Country Setting
You should set the country setting during the initial management session
of the access point to ensure that the device operates in compliance with
the codes and regulations of your region or country.
To set the country setting, perform the following procedure:
1. Select Wireless Settings from the Manage menu.
The access point displays the Modify wireless settings window, shown
in Figure 31.
Figure 31. Modify Wireless Settings Window
2. Select the Country pull-down menu and select your country or region.
Note
If the Country pull-down menu is deactivated and cannot be
changed, the country parameter was set when the unit was
manufactured and cannot be changed. If the setting is not correct for
your country or region, contact your Allied Telesis sales
representative for assistance.
The access point displays a confirmation prompt.
3. Click OK to change the country setting or Cancel to cancel the
procedure.