beautypg.com

Allied Telesis AT-TQ2450 User Manual

Page 47

background image

AT-TQ2450 Wireless Access Point Installation Guide

47

Figure 25. Attaching the LAN Cable

8. Connect the other end of the network cable to a port on an Ethernet

switch.

If you are not using the PoE feature on the Ethernet port to power the
unit, continue with this procedure to attach the AC/DC power adapter.

If you are using the PoE feature to power the access point, the
installation procedure is complete. Go to “Starting the Initial
Management Session on the Access Point” on page 51.

9. Connect the power cord to the AC/DC adapter. Refer to Figure 26.

Figure 26. Connecting the Power Cord to the AC/DC Adapter