Allied Telesis AT-TQ2450 - Manual (Page 50)

Chapter 2: Installing the Access Point
50
Installing Anti-theft Devices
The bracket has three holes for anti-theft devices. You may want to install
one or more anti-theft devices if the access point is installed in a non-
secure area. When an anti-theft device is installed on the bracket, the top
panel and access point cannot be removed from the bottom panel. The
holes are identified in Figure 29.
Note
Anti-theft devices are not available from Allied Telesis.
Figure 29. Holes for Anti-theft Devices on the AT-BRKT-J26 Bracket
Kensington Lock
Torx or similar screw
(M3 x 4mm)
Padlock