beautypg.com

Allied Telesis AT-GS950/8 User Manual

Page 357

background image

AT-GS950/8 Web Interface User Guide

357

4. In the Reboot Type field, select Normal from the pull-down menu.

When the switch is rebooted with this selection, all configuration
parameters that are saved in flash memory are loaded into the switch’s
active memory.

Note

Two additional options are available in the Reboot Type field. The
procedures for these options are described in "Configure Factory
Default Values".

5. Click Apply.

The switch immediately begins to reload the AT-S113 Management
software and configuration parameters. This process takes
approximately two minutes to complete. You cannot manage the
device during the reboot. After the reboot is finished, you can log in
again if you want to continue to manage the switch.