Allied Telesis AT-GS950/8 - Manual (Page 153)

AT-GS950/8 Web Interface User Guide
153
6. To enable or disable ingress and egress Broadcast packets, select
Enable or Disable from the Broadcast pull-down menu next to the
port that you want to change.
You can select the All row to set all of the ports to the same setting.
The Ignore parameter indicates that the setting in the All row does not
apply to the Broadcast menu for individual ports.
Note
For more information, refer to the Broadcast setting definition in
“Overview” on page 150.
7. Click Apply.
8. To enable or disable ingress and egress Multicast packets, select
Enable or Disable from the Multicast pull-down menu next to the port
that you want to change.
You can select the All row to set all of the ports to the same setting.
The Ignore parameter indicates that the setting in the All row does not
apply to the Multicast menu for individual ports.
Note
For more information, see the Multicast setting definition in
“Overview” on page 150.
9. Click Apply.
10. To set the Threshold field, type in the threshold next to the port that
you want to change. The range is from 1 to 22194 packets per second.
You can select the All row to set all of the ports to the same setting.
The Ignore parameter indicates that the setting in the All row does not
apply to the Threshold menu for individual ports.
Note
For more information, see the Threshold setting definition in
“Overview” on page 150.
11. Click Apply.
12. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.