Allied Telesis AT-GS950/8 - Manual (Page 249)

AT-GS950/8 Web Interface User Guide
249
4. Change the parameters as required. You cannot change the policy
index number from this page.
Note
See “Create a Policy” on page 243 for definitions of each parameter.
5. Click Apply.
The modified policy entry is displayed in the table at the bottom of the
Policy Settings page.
6. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.
Delete a Policy To delete a policy entry, perform the following procedure:
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.
2. From the Access Control Config folder, select Policy Settings.
An example of a policy entry on the Policy Settings page is displayed
in Figure 94 on page 247.
3. From the Policy Settings page, identify which policy entry that you
want to delete and click the Delete button in the Action column.
The policy entry is deleted from the policy table.
You can also use the Delete All button to delete all entries from the
policy table.
4. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.
View Specific
Classifier Details
To view the details of the packet settings for a specific policy, perform the
following procedure:
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.
2. From the Access Control Config folder, select Policy Settings.
The Policy Settings page is displayed. See Figure 94 on page 247 for
an example of an entry in the Policy Settings page.
3. Click the Detail button under the Classifier column for classifier details
of the policy you want to view. The Classifier Detail page appears. See
Figure 96 on page 250.