Allied Telesis AT-GS950/8 - Manual (Page 339)

AT-GS950/8 Web Interface User Guide
339
Download or Upload a Configuration File via HTTP
This section describes how to download or upload a configuration file
using HTTP on an Internet server. For example, you can save the switch’s
configuration file to your PC, then the saved file can be transferred to other
switches.
Before you download or upload a configuration file via HTTP, note the
following:
 You must be able to access the new AT-S113 configuration file from
your PC when uploading a file from a PC to the switch.
 The switch that you are working with must have an IP address and
subnet mask assigned, either manually or via DHCP. For instructions
on how to manually set the IP address and subnet mask on a switch,
see “Configuration of IPv4 Address, Subnet Mask and Gateway
Address” on page 32. To enable a DHCP client, see “DHCP Client
Configuration” on page 53.
To download an AT-S113 configuration file to your PC or upload an AT-
S113 configuration file onto the switch using a web browser, perform the
following procedure:
1. From the menu on the left side of the home page, select the Tools
folder.
The Tools folder expands.
2. From the Tools folder, select Config File Backup/Restore folder.
The Config File Backup/Restore folder expands.
3. From the Config File Backup/Restore folder, select via HTTP.
The Configuration File Backup/Restore via HTTP page is displayed.
See Figure 136.
Figure 136. Configuration File Backup/Restore via HTTP Page