Allied Telesis AT-GS950/8 - Manual (Page 215)

AT-GS950/8 Web Interface User Guide
215
Modify User and
Group Names
If you need to modify an entry in the SNMP User/Group page, you must
first delete the entry and then re-enter it. For information about how to
delete an entry in this table, see “Delete User and Group Names,” next.
To create a new entry in this table, see “Create User and Group Names”
on page 213.
Delete User and
Group Names
This procedure explains how to delete an entry on the SNMP User/Group
page.
1. From the main menu on the left side of the page, select the SNMP
folder.
The SNMP folder expands.
2. From the SNMP folder, select SNMP User/Group.
The SNMP User/Group Page is displayed. See Figure 77 on page 213.
3. In the Action column of the table, click Delete for the User Name and
Group Name that you want to remove.
4. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.