Allied Telesis AT-GS950/8 - Manual (Page 311)

AT-GS950/8 Web Interface User Guide
311
MAC Address - Enter the host’s MAC Address.
IP Address - Enter the static IP Address assigned to the host
using one of the IP Address fields:
For an IPv4 address, click IPv4, then enter the address using
xxx.xxx.xxx.xxx format.
For an IPv6 address, click IPv6, then enter the address using
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx hexadecimal format.
VLAN - Enter the host’s VLAN ID.
Port - Enter the port number where the host is connected.
Type - Because the IP Address being entered is static, select
Static.
2. Click Add.
The static address information is entered into the Binding Database.
See Figure 126 for an example.
Figure 126. Binding Database Page Example
Viewing A dynamically assigned IP address from the DHCP server automatically
populates the table on the Binding Database page. You must enter
statically assigned IP Addresses and their corresponding fields at the top
of the web page. See “Static IP Addresses” on page 310 for more
information.
The Binding Database table at the bottom of the web page displays the
following information:
MAC Address - This parameter shows the host’s MAC Address.