Allied Telesis 8100S Series - Manual (Page 94)

Chapter 5: Powering On the Switch
94
computer with a terminal emulator program connected to the Console
port on the switch, you will see the messages in Figure 35 on page 89
to Figure 36 on page 90.
11. Repeat this procedure to power on the second power supply.
Warning
This unit might have more than one power source. To reduce the
risk of electric shock, disconnect all power cords before servicing the
unit.
 E30
12. Go to “Setting the Stack ID Number” on page 95 to confirm the
switch’s ID number.