Allied Telesis 8100S Series - Manual (Page 58)

Chapter 2: Beginning the Installation
58
Installation Procedures
You may install the switch on a table or in an equipment rack. Perform
these procedures to install the switch on a table:
 “Reviewing Safety Precautions” on page 59
 “Choosing a Site for the Switch” on page 63
 “Unpacking the Switch” on page 64
 “Installing the Switch on a Table or Desktop” on page 70
 “Cabling the Networking Ports” on page 77
 “Powering On an AC Switch” on page 86 or “Powering On a DC
Switch” on page 91
 “Setting the Stack ID Number” on page 95
Perform these procedures to install the unit in an equipment rack:
 “Reviewing Safety Precautions” on page 59
 “Choosing a Site for the Switch” on page 63
 “Unpacking the Switch” on page 64
 “Installing the Switch in an Equipment Rack” on page 71
 “Cabling the Networking Ports” on page 77
 “Powering On an AC Switch” on page 86 or “Powering On a DC
Switch” on page 91
 “Setting the Stack ID Number” on page 95