Samsung SCH-N330PWMXAR - Manual (Page 167)

Section 13: Setup 167
Security
Section 13
Note: The default lock code for your phone is the last four digits of your
phone number.
The Lock prompt disappears and the Security menu
appears in the display.
3. Press for Erase Memory. A confirmation prompt
appears in the display.
4. Use the navigation key to highlight Yes or No, then press
. A confirmation message appears in the display
while the memory is erased.
Reset Phone
The Reset Phone feature restores the factory default
settings and erases your Call Log, but Today,
Countdown, and To Do List remain the same.
Note: This cannot be undone after you confirm phone reset.
1. In standby mode, press the Menu (left) soft key ( ),
then press (Setup) and for Security.
The Lock prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code for your phone is the last four digits of your
phone number.
The Lock prompt disappears and the Security menu
appears in the display.